粉體行業在線展覽
粉體行業在線展覽
RT 100 XL
直接聯系
德國Retsch（萊馳）中國總部
德國
1-5萬元
Retsch
RT 100 XL
8537
無
實驗室與現場均可使用
高度精確的人工分樣工藝
optimized splitting process by evenly spreading the sample over the hopper
variable slot widths permit splitting of coarse bulk material
分樣工藝根據DIN 51701
農業, 化學 / 合成材料, 醫藥品, 地質 / 冶金, 工程/電子, 建筑原料, 環境 / 資源回收利用, 玻璃/ 陶瓷, 生物, 食物
化學制品, 咖啡, 土壤, 堅果, 填充物, 建筑原料, 水泥熔渣, 沙子, 洗衣粉, 礦物, 種子, 肥料, 谷物, 金屬粉末, 面粉, ...
faultless and comparable analysis is closely linked to an accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Sample splitters ensure the representativeness of a sample and thus the reproducibility of the analysis.
The RT 100 XL is equipped with a feed hopper with closed outlet. Thus, up to 30 l sample material
may be evenly spread over the entire width of the hopper. The outlet is
opened manually by moving a lever and the sample is splitted. The slots
of the dividing head can be adjusted to a maximum width of 108 mm.
The
sample splitters RT are ideal for the on-site reduction of sample
material. They are easy to use, easy to clean and do not need an
electrical power supply.
化學制品, 咖啡, 土壤, 堅果, 填充物, 建筑原料, 水泥熔渣, 沙子, 洗衣粉, 礦物, 種子, 肥料, 谷物, 金屬粉末, 面粉, ...
實驗室與現場均可使用
高度精確的人工分樣工藝
optimized splitting process by evenly spreading the sample over the hopper
variable slot widths permit splitting of coarse bulk material
分樣工藝根據DIN 51701
| 應用 | 分樣 |
| 應用領域 | 農業, 化學 / 合成材料, 醫藥品, 地質 / 冶金, 工程/電子, 建筑原料, 環境 / 資源回收利用, 玻璃/ 陶瓷, 生物, 食物 |
| 樣品特征 | 散裝疏松材料 |
| 進料粒度* | Slot width adjustable 12 / 24 / 36 / 48 / 60 / 72 / 84 / 96 / 108 mm |
| 批次加料量* | ≤ 30 l |
| 分樣份數 | 2 |
| 機體尺寸 (寬x高x縱深) | 72 x 70 x 46 cm |
| 凈重 | ~ 55 kg |
Please note:
受樣品材料性質和儀器配置/設定的影響
With sample splitters, one of the receptacles is used to pour a well mixed sample evenly into the dividing head. The material runs through the alternately arranged passages in the opposite direction into the two collecting receptacles under the dividing head outlets. With every operation the feed sample is halved. This can be repeated as many times as necessary until the required dividing quantity has been obtained.
根據技術改造和誤差調整
